ZIRKONZAHN.SCAN v.5051

Presenting the complete solution in a way of emulation WIBUKEY dongle for software called

ZIRKONZAHN.SCAN

A brief description from the official site:

  • This scan software allows exact scanning of the models and the articulator
  • In doing so, the software uses the joblist created by the archive
  • The wizard guides you through the different required scans
  • Virtual articulator:
    • After registering your articulator in the software, the models will be displayed in the right position
    • Thanks to the Fine-Adjustment function for the articulator, it is possible to scan the current status of the articulator, e.g. in connection with a reduced vertical dimension
    • You can insert planes into the virtual articulator for a better orientation when positioning a model.
    • For the articulation of models, different systems (Plane System® by Udo Plaster, Camper’s or the Frankfurt plane) can be used
    • 2D pictures, 3D facial scans and X-ray images of the patient can be inserted as an optical aid
  • Major flexibility:
    • Scans can be deleted
    • Instead of following the process list, you can decide the order and the importance of the scans on your own
  • You have the possibility to scan an impression and to convert it into a fully adequate and positive mould of the model
  • With just two clicks you can add scanning sequences for the registration of extreme undercuts (if they were not scanned properly at the first try: e.g. in case of tilted teeth)
  • Simultaneous scan and calculation of different models
  • Faster working thanks to the parallelization of the workflow: Work steps are carried out simultaneously which implies that continuous scanning is possible, even if previous scanning sequences are not completely loaded
  • With the Multi-Die Holder, single dies of the upper and lower jaw can be scanned simultaneously; current scan time for 14 units: 45 seconds
  • Scan of impressions and double impressions
  • Scan and match function: Scanning an element from various perspectives and subsequently matching the scans
  • Duplicating scans: if you need a scan of the gingiva and you already have one from the Healthy Scan, you can clone it.

ZIRKONZAHN.SCAN v.5051 WIBUKEY dongle emulator

Trial version is available on demand.

ZIRKONZAHN.SCAN WIBUKEY emulator
zirkonzahn_s_scr02
ZIRKONZAHN.SCAN Proof Of Work

The emulator is designed for x86 (32bit) and x64 (64bit) Windows platform, was tested on all versions up to Windows 10 and has no restrictions of use.

If you want to get more information about this solution please contact us.

WIBUKEY

mb AEC Software GmbH WorkSuite 2015/2017

A complete WIBUKEY dongle emulator has been requested for the modern version of software called

mb AEC Software GmbH WorkSuite 2015/2017

A brief description from the official site (auf Deutsch, sorry):

Die mb AEC Software GmbH ist einer der führenden Anbieter von Software im Bauwesen. AEC steht für „Architecture, Engineering and Construction“ und begleitet unseren Firmennamen seit fast 10 Jahren. AEC meint die umfassende Betrachtung eines Bauprozesses vom Entwurf bis zur Tragwerksplanung.

  • Mit der mb WorkSuite wollen wir Architekten und Ingenieuren Werkzeuge für die tägliche Arbeit bieten, die gut in der Hand liegen und ideal aufeinander abgestimmt sind. Wenn wir von der mb WorkSuite sprechen, meinen wir die Fülle der Programme, deren tiefe Integration untereinander und das komfortable, smarte Arbeiten mit jedem einzelnen Bestandteil der Suite. Deshalb geben wir der mb WorkSuite auch den Untertitel “Arbeiten mit Komfort”.
  • ViCADo ist ein modernes, bauteilorientiertes 3D-CAD-System. Durch das einheitliche Datenformat wird eine durchgängige Bearbeitung vom Entwurf bis zur Tragwerksplanung erreicht. ViCADo.arc für die Architektur, ViCADo.ing für die Tragwerksplanung oder einfach ViCADo!
  • Die BauStatik war und ist Trendsetter: Schlagworte wie Lastübernahme mit Korrekturverfolgung, Dokument-orientierte Statik oder konsequente Vorlagentechnik sind nur einige Details, die man nicht mehr missen möchte. Daneben verdankt die BauStatik ihren hervorragenden Ruf zu Recht ihrer allgemein anerkannten Vollständigkeit und Qualität.
  • CoStruc sind die Produkte der Kretz Software GmbH rund um den Verbundbau. CoStruc gehört zu den Pionieren der Berechnungssoftware für dieses Spezialgebiet. Durch die konsequente Integration dieser Softwaremodule in die BauStatik stehen nun auch alle Vorteile der Dokument-orientierten Statik zur Verfügung.
  • MicroFe ist eines der ersten FEM-Systeme für die Tragwerksplanung. Es zeichnet sich durch eine konsequente positionsorientierte Arbeitsweise aus. Die MicroFe-Modelle können nahtlos in die BauStatik integriert werden und verfügen dadurch auch über eine Lastübernahme mit Korrekturverfolgung.
  • EuroSta.holz dient der Berechnung und Bemessung von ebenen und räumlichen Stabtragwerken aus Holz. Es bietet eine effektive, grafische Bearbeitung der Tragstruktur durch Integration von Eingabe / Statik / Nachweise / Bemessung einschließlich Systemknickstabilität, Eigenschwingungen und Numerik / Kinematik-Tests bis hin zur Berechnung der Anschlusskräfte.
  • EuroSta.stahl dient der Berechnung und Bemessung von ebenen und räumlichen Stabtragwerken aus Stahl. Es bietet eine effektive, grafische Bearbeitung der Tragstruktur durch Integration von Eingabe / Statik / Nachweise / Bemessung einschließlich Systemknickstabilität, Eigenschwingungen und Numerik / Kinematik-Tests bis hin zur Anschlussbemessung.
  • Mit dem ProfilMaker definieren Sie eigene Profilquerschnitte und berechnen alle Querschnittswerte, welche zur Verwendung der Profile in der BauStatik, EuroSta.stahl oder MicroFe erforderlich sind. Über den ProfilMaker können auch alle Nachweise im Querschnitt geführt werden.

mb WorkSuite dongle emulator

We were asked is it possible to make a dongle emulator that can represent a couple of WIBUKEY devices. The answer is ‘Yes, sure!’. Emulator is designed fo 32bit and 64 Windows based operating systems and were tested on the latest Windows 10 version as well. Please be advised, mb WorkSuite needs also a personal license file to be used together with hardware key.

Trial version is available on demand.

If you want to get more information about this solution please contact us.

WIBUKEY

MADRIX 3 Ligthning Control

Another request for WIBUKEY dongle emulator were successfully finished. Hardware key was used to run software called

MADRIX 3 Ligthning Control

A brief description from the official site:

Key Features
The application is both an effect generator and media server with outstanding capabilities to display unique real-time effects on your LEDs.
Endless stunning and fully customizable visuals are created live for you using pixel mapping (2D), voxel mapping (3D), and the built-in graphics
and rendering engine. MADRIX can be used alone, or along with a console or desk.
Complementary MADRIX hardware reliably controls your LED installation via MADRIX – the centerpiece of our intuitive products.
This provides a seamless integration of both software and hardware and high performance.

Universal Flexibility
LEDs have become a major highlight in today‘s illumination and entertainment industries and for any lighting enthusiast. The MADRIX Software can produce a complete LED light show from a normal computer or laptop. It can drive tens of thousands of LEDs without problems. This powerful controller will not only allow you to control nearly any 2D LED display in every possible way, but real 3D LED applications as well. This makes it the ideal solution for your LED project.

Audio-Based Effects & Endless Creativity
MADRIX Software features a state-of-the-art audio analysis. It can process any live audio signal and create stunning real-time lighting visuals. These live effects will create a light show that runs in sync with your music. And thanks to the integrated effects generator, you can also create many lighting patterns without audio input. On top, you will find an unprecedented level of customization available for all visuals. Creating stunning light effects has never been easier.

Easy Control
MADRIX Software is very easy to use. Still, it provides many advanced features you would not want to miss. The numerous possibilities and the intuitive user interface are easily
accessible and will allow you to produce amazing results right from the start. This software delivers high quality while meeting your individual requirements. At the same time, it simplifies the process of working with your LED installation. You can also control the MADRIX Software remotely or via Touch Screen.

2D Pixel Mapping & 3D Voxel Mapping
MADRIX Software is highly versatile and will help you to get the most out of modern LED technology. You can easily bring creative and diverse lighting effects to any 2D or 3D LED installation. The MADRIX Software is a powerful tool that will help you realize the projects you want to build. MADRIX lighting control solutions certainly take your LED display to the next level.

MADRIX 3.x WIBUKEY dongle emulator

The emulator is designed for x86 (32bit) and x64 (64bit) Windows platform, was tested on all versions up to Windows 10 and has no restrictions of use.

Trial is available on demand.

If you want to get more information about this solution please contact us.

WIBUKEY